| Micro ATX-V230BT (Bestec ATX-1953F) |
 |
 |
This Micro ATX power supply is a 230W, PS3 Form Factor, five output unit with remote
on/off, UL, CE, TUV approvals. Comes with Power Factor Correction (PFC). Original HP
part number 5187-4875, also an upgrade for part number 5187-4874.
Airflow drawn out of case into surroundings by 80mm internal fan. Built-in power status LED
above AC inlet. Connector bundle exits right side of unit. Bestec model ATX-1953F.
|
|
|
|
| Connectors |
 |
| This power unit has (1) ATX connector, (1) ATX12V connector,
(4) peripheral power connectors, and (1) floppy drive connector. |
|
| 20 pin ATX1 |
ATX12V2 |
Peripheral3 |
Floppy4 |
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2200 or equivalent. Pin 11 also contains +3.3V Sense.
2MOLEX 39-29-9042 or equivalent.
3AMP 1-480424-0 or equivalent. 4AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
Bestec |
Model |
ATX-1953F |
| Type |
OEM microATX(12V) |
Warranty |
1 year |
| Dimensions |
100L x 150W x 86H mm |
Dimensions US |
3.9" x 5.9" x 3.4" |
| Safety |
UL, CE, TUV |
Efficiency |
68% minimum |
| Reliability |
> 50K hours at 25°C ambient conditions. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 115/230VAC |
6/3 A |
47-63 HZ |
Internal fuse |
| AC Input is switch selectable between 115V (100-127V) and 230V (200-240V). |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple |
Load |
Line |
| +3.3V |
18 A |
0.0 A |
50 mVpp |
+5% |
+1% |
| +5V |
19 A |
2.0 A |
50 mVpp |
+5% |
+1% |
| +12V |
15 A |
0.02 A |
120 mVpp |
+5% |
+1% |
| -12V |
0.8 A |
0.1 A |
120 mVpp |
+5% |
+1% |
| +5VSB |
2.0 A |
0.0 A |
50 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output not to exceed 150W,
(2) Load and line refer to regulation, (3) Output Voltage Hold Time is 16mS. |
|
