|
|
| Micro ATX-180HP (180W HP Pavilion) |
 |
 |
This Micro ATX power supply is a 180W, SFX Form Factor, six output unit with remote
on/off, energy star certification, UL, CSA, CB, TUV, NEMKO and CE approvals. Aftermarket
power for HP Pavilion computers requiring SFX Form Factor with 4 pin video power connector.
Better than original ! Does not require 3 pin connector for board control of power supply
fan. Airflow drawn out of case by 80mm internal fan. Upgrade for Bestec
ATX-151, and HP part numbers 0950-3602, 0950-3646,
0950-3657, 0950-3746, 0950-3449,
0950-3994, 0950-4097, 5184-2191 and
5185-2003 with video power connector.
|
|
|
|
| Connectors |
 |
| This power unit has (1) ATX connector, (1) ATX12V connector,
(1) video power connector, (3) peripheral power connectors, and (1) floppy drive connector. |
|
| 20 pin ATX1 |
ATX12V2 |
HP Video3 |
Peripheral4 |
Floppy5 |
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2200 or equivalent. Pin 11 also contains +3.3V Sense.
2MOLEX 39-29-9042 or equivalent.
3HP video power board connector.
4AMP 1-480424-0 or equivalent. 5AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
Fortron/Source |
Model |
FSP180-50NIV |
| Type |
OEM SFX12V |
Warranty |
1 year |
| Dimensions |
125L x 100W x 63.5H mm |
Dimensions US |
4.9" x 3.9" x 2.5" |
| Safety |
UL, CSA, TUV, NEMKO, CB, CE |
Efficiency |
65% minimum |
| Reliability |
> 100K hours at 25°C ambient conditions. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 115/230VAC |
6/3 A |
47-63 HZ |
Internal fuse |
| AC Input is switch selectable between 115V (95-132V) and 230V (180-264V). |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple |
Load |
Line |
Cross |
| +3.3V |
16.7 A |
0.0 A |
50 mVpp |
+5% |
+5% |
+5% |
| +5V |
16 A |
1.0 A |
50 mVpp |
+4% |
+5% |
+4% |
| +12V |
10 A |
0.2 A |
120 mVpp |
+5% |
+5% |
+5% |
| -12V |
0.3 A |
0.0 A |
120 mVpp |
+10% |
+5% |
+5% |
| -5V |
0.2 A |
0.0 A |
120 mVpp |
+10% |
+5% |
+5% |
| +5VSB |
2.0 A |
0.0 A |
50 mVpp |
+5% |
+5% |
+5% |
| Notes: (1) Load, line, and cross refer to regulation,
(2) Output Voltage Hold Time is 16mS. |
|
|
