|
|
| Micro ATX-V200HP (HP Pavilion) |
 |
 |
This Micro ATX power supply is a 200W, PS3 Form Factor, six output unit with remote on/off,
energy star certification, UL, CSA, CB, TUV, NEMKO and CE approvals. Does not require 3 pin
connector for board control of power supply fan. Airflow drawn out of case into
surroundings by 80mm internal fan. Includes proprietary 4 pin video power connector used by
some HP systems. If not needed, leave unattached. Aftermarket product suitable for HP part
numbers 0950-2800, 0950-3426,
0950-3623, 0950-3751, 0950-3961,
0950-4106, 0950-4107, 0950-4270,
5184-3961, 5185-2974, and 5187-1061.
|
|
|
|
| Connectors |
 |
| This power unit has (1) ATX connector, (1) ATX12V connector,
(1) video power connector, (5) peripheral power connectors, and (1) floppy drive
connector. |
|
| 20 pin ATX1 |
ATX12V2 |
HP Video3 |
Peripheral4 |
Floppy5 |
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2200 or equivalent. Pin 11 also contains +3.3V Sense.
2MOLEX 39-29-9042 or equivalent.
3HP video power board connector.
4AMP 1-480424-0 or equivalent. 5AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
Fortron/Source |
Model |
FSP200-60SPV |
| Type |
OEM microATX(12V) |
Warranty |
1 year |
| Dimensions |
100L x 150W x 86H mm |
Dimensions US |
3.9" x 5.9" x 3.4" |
| Safety |
UL, CSA, TUV, CB |
Efficiency |
65% minimum |
| Reliability |
> 50K hours at 25°C ambient conditions. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 115/230VAC |
7/4 A |
47-63 HZ |
Internal fuse |
| AC Input is switch selectable between 115V (100-120V) and 230V (200-240V). |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple |
Load |
Line |
| +3.3V |
16.7 A |
0.2 A |
50 mVpp |
+5% |
+1% |
| +5V |
21 A |
2.0 A |
50 mVpp |
+5% |
+1% |
| +12V |
10 A |
0.2 A |
120 mVpp |
+5% |
+1% |
| -5V |
0.2 A |
0.0 A |
120 mVpp |
+10% |
+2% |
| -12V |
0.5 A |
0.0 A |
120 mVpp |
+10% |
+2% |
| +5VSB |
2.0 A |
0.0 A |
50 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output not to exceed 118W,
(2) Load and line refer to regulation, (3) Output Voltage Hold Time is 16mS. |
|
|