 |
 |
This Flex ATX12V power supply is a 200W, five output unit with
remote on/off, ball-bearing fan, UL and CSA approvals. +5V Standby line sources up to
2.0A of current. Long and thin size (190Lx81.4Wx42H mm) with side mounted 60mm ball
bearing fan. Properly mounted, the power supply fan provides extra system cooling by
drawing air out of computer case into surroundings through vents above AC inlet. Nice
unit with good power and cooling capabilities. Replacement for HEC-200SR-T
and HEC-200SR-AT. Manufacturer p/n FSP200-50PS.
|
|
|
|
Connectors & Specs:
This power unit has (1) 20 pin ATX connector, (1) ATX12V
connector, (3) peripheral power connectors, and (1) floppy drive connector. |
| 20 pin ATX1 |
ATX12V2 |
Peripheral3 |
Floppy4 |
|
|
|
|
|
| P/N or equivalent:
1MOLEX 39-01-2200 2MOLEX 39-29-9042 3AMP 1-480424-0 4AMP 171822-4
|
Manufacturer: Fortron/Source
Model: FSP200-50PS
Type: flexATX12V
Warranty: 1 year
Dimensions: 190L x 81.4W x 42H mm (7.5" x 3.2" x 1.7")
Mounting Pattern: see drawing
Safety: UL, CSA, TUV, NEMKO, CB, CE
Efficiency: 70% minimum
Reliability: > 100K hours with all outputs at maximum load, ambient temperature of 25°C
AC Input: 115/230VAC, 5/3A, 47-63HZ
DC Outputs (Amps Max/Min): +3.3V (10/0.2A), +5V (20/1.0A), +12V (12/0.2A), -12V (0.3/0.0A), +5VSB (2.0/0.0A)
DC Notes: (1) +3.3V and +5V total output not to exceed 100W, (2) +3.3V, +5V, +12V total output not to exceed 186.5W
|
