|
|
| EA460U (460W EPS12V/ATX12V/ATX) |
 |
 |
460Watt EPS12V-ATX12V multi-purpose power supply, five output unit with remote on/off and UL, CSA, DVE, NEMKO, CB, CE
approvals. Connector harness configurable for EPS12V, ATX12V-V2.0, ATX12V, and ATX main
boards. Includes two daisy chained Serial ATA connectors and one PCI Express connector.
Standard features include active Power Factor Correction (PFC) > 0.98 @ 100VAC, full
range 100-240VAC input, ball bearing fan with noise killer, split +12V rails for CPU and
subsystem I/O. Airflow drawn through vents in rear of supply into ambient surroundings.
Compliant with EPS12V and ATX12V Power Supply Design Guides. RoHS qualified.
Manufacturer p/n FSP460-60GLC.
|
|
|
∗ ∗ ∗ Upgrade for many Dell, HP, Compaq, and Gateway systems, too numerous to list.
Cable harness is configurable: 20 or 24 pin main power connector, processor power and/or ATX12V
connectors, and four types of support connectors (PCI, SATA, Peripheral, Floppy). ∗ ∗ ∗
|
| Connectors |
 |
| This power unit has (1) 20+4 ATX connector, (1) processor
power connector, (1) ATX12V connector, (1) PCI Express connector, (2) Serial ATA connector,
(5) peripheral power connectors, and (1) floppy drive connector. |
|
| 20+4 ATX1 |
Proc Power2 |
ATX12V3 |
PCI Power4 |
SATA Power5 |
Peripheral6 |
Floppy7 |
|
|
|
|
|
|
|
|
Connector notes:
120+4 combination equals MOLEX 39-01-2240 or equivalent. When using in 24 pin mode,
combine connectors labeled P1 and P24. Connector labels should face on same side. If using in
20 pin mode, for ATX12V boards, tie up connector labeled P24.
2MOLEX 39-01-2080 or equivalent.
3AMP 1-480424-0 or equivalent.
4MOLEX 39-01-2060 or equivalent.
5MOLEX housing #675820000, MOLEX terminal #675810000 or equivalents.
6AMP 1-480424-0 or equivalent.
7AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
FSP Group |
Model |
FSP460-60GLC |
| Type |
SSI EPS12V, ATX12V |
Warranty |
1 year |
| Dimensions |
140L x 150W x 86H mm |
Dimensions US |
5.5" x 5.9" x 3.4" |
| Efficiency |
70% minimum |
Acoustics |
< 38dB |
| Safety |
UL, CSA, DVE, NEMKO, CB, CE |
PFC Standard |
EN61000-3-2 + A1 + A2 |
| EMC Standard |
CISPR22, C-tick & FCC part 15 class B |
| Reliability |
> 100K hours with all outputs at maximum load, ambient
temperature of 25°C. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 100-240VAC |
7.5-3.5 A |
50-60 HZ |
Internal fuse |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple & Noise |
Load Regulation |
Line Regulation |
| +3.3V |
30 A |
0.5 A |
100 mVpp |
+5% |
+1% |
| +5V |
30 A |
0.3 A |
100 mVpp |
+5% |
+1% |
| +12V1 |
16 A |
1.0 A |
200 mVpp |
+5% |
+1% |
| +12V2 |
18 A |
1.0 A |
200 mVpp |
+5% |
+1% |
| -12V |
0.5 A |
0.0 A |
200 mVpp |
+10% |
+1% |
| +5VSB |
2.5 A |
0.0 A |
100 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output shall not exceed
152W, (2) +3.3V, +5V, +12V1, and +12V2 total output shall not exceed 440W, (3) total
combined output not to exceed 550W, (3) Output Voltage Hold Time is 17mS. |
|
|
