 |
 |
Affordable 450W EPS12V-ATX12V power supply, five output unit with remote on/off, and UL, CSA, DVE, NEMKO,
CB, CE approvals. Connector harness configurable for EPS12V, ATX12V, and ATX12V-V2.0 main
boards. Includes two daisy chained Serial ATA connectors and one PCI Express connector.
Standard features include ball bearing fan with noise killer, split +12V rails for CPU and subsystem I/O.
Excellent system cooling, compliments of a 120mm fan providing a CFM of 60 at 39dB; airflow drawn into
fan and out rear vents into ambient surroundings. Compliant with EPS12V and ATX12V Power Supply
Design Guides. RoHS qualified. Manufacturer p/n ATX-450PN.
|
|
|
|
Connectors & Specs:
This power unit has (1) 20+4 ATX connector, (1) 4+4 processor
power connector, (1) PCI Express connectors, (2) Serial ATA connectors,
(5) peripheral power connectors, and (1) floppy drive connector. |
| 20+4 ATX1 |
4+4 Proc2 |
PCI Power3 |
SATA Power4 |
Peripheral5 |
Floppy6 |
|
|
|
|
|
|
|
P/N or equivalent:
120+4 combination equals MOLEX 39-01-2240. When using in 24 pin mode,
combine connectors labeled P1 and P24. Connector labels should face on same side. If using in
20 pin mode, for ATX12V boards, tie up connector labeled P24.
24+4 combination equals MOLEX 39-01-2080. When using in 8 pin mode,
combine connectors labeled CPU1 and CPU2. Connector labels should face on same side. If using
power supply for ATX12V board, use CPU1 or CPU2 for P4 power connector. Remaining 4 pin will
be unused.
3MOLEX 39-01-2060 4MOLEX housing #675820000, MOLEX terminal #675810000 5AMP 1-480424-0 6AMP 171822-4
|
Manufacturer: FSP Group
Model: ATX-450PN
Type: SSI EPS12V, ATX12V
Warranty: 1 year
Dimensions: 140L x 150W x 86H mm (5.5" x 5.9" x 3.4")
Mounting Pattern: see drawing
Safety: UL, CSA, TUV, NEMKO, CB, CE
Efficiency: 70% minimum
Reliability: > 100K hours with all outputs at maximum load, ambient temperature of 25°C
AC Input: 115/230VAC selectable, 10/5A, 47-63HZ
DC Outputs (Amps Max/Min): +3.3V (22/0.5A), +5V (15/0.3A), +12V1 (18/1.0A), +12V2 (18/1.0A), -12V (0.3/0.0A), +5VSB (2.5/0.0A)
DC Notes: (1) +3.3V and +5V total output not to exceed 145W, (2) +12V1 and +12V2 total output not to exceed 360W, (3) +3.3V, +5V, +12V1, and +12V2 total output not to exceed 433W
|
