|
|
| DELL-460X (460W Dell Power) |
 |
 |
This power supply is a Dell 460W proprietary ATX, suitable for Dell Dimension 8100,
OptiPlex GX400, PowerEdge 1300 and 2300; Precision WorkStation 330, and 420.
PS2 Form Factor, six output unit with remote on/off, and UL, CSA, CB, TUV, NEMKO and CE
approvals. Standard features include active Power Factor Correction (PFC) > 0.98 @ 100VAC,
full range 100-240VAC input, ball bearing fan with noise killer, split +12V rails for
CPU and subsystem I/O, PCI and SATA connectors. Airflow drawn through vents in rear of supply into ambient
surroundings. RoHS qualified. Solution combines standard ATX12V-2.0 power unit and
adapters necessary for Dell compatibility.
|
|
|
|
| Connectors |
 |
| This power unit has (1) Dell proprietary 24 pin ATX connector, (1) Dell
proprietary processor power connector, (1) PCI Express connector, (2) Serial ATA connector,
(5) peripheral power connectors, and (1) floppy drive connector. |
|
| 24 pin Dell ATX1 |
Dell Proc Power2 |
PCI Power4 |
SATA Power5 |
Peripheral6 |
Floppy7 |
|
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2240 or equivalent. Original Dell part has TFSC (Thermal Fan Speed Control) on pin 21. This
power supply regulates fan speed without board assistance.
2MOLEX 39-01-2160 or equivalent.
3MOLEX 39-01-2060 or equivalent.
4MOLEX housing #675820000, MOLEX terminal #675810000 or equivalents.
5AMP 1-480424-0 or equivalent. 6AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
FSP Group |
Model |
FSP460-60GLC |
| Type |
Proprietary |
Warranty |
1 year |
| Dimensions |
140L x 150W x 86H mm |
Dimensions US |
5.5" x 5.9" x 3.4" |
| Efficiency |
70% minimum |
Acoustics |
< 38dB |
| Safety |
UL, CSA, DVE, NEMKO, CB, CE |
PFC Standard |
EN61000-3-2 + A1 + A2 |
| EMC Standard |
CISPR22, C-tick & FCC part 15 class B |
| Reliability |
> 100K hours with all outputs at maximum load, ambient
temperature of 25°C. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 100-240VAC |
7.5-3.5 A |
50-60 HZ |
Internal fuse |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple & Noise |
Load Regulation |
Line Regulation |
| +3.3V |
30 A |
0.5 A |
100 mVpp |
+5% |
+1% |
| +5V |
30 A |
0.3 A |
100 mVpp |
+5% |
+1% |
| +12V1 |
16 A |
1.0 A |
200 mVpp |
+5% |
+1% |
| +12V2 |
18 A |
1.0 A |
200 mVpp |
+5% |
+1% |
| -12V |
0.5 A |
0.0 A |
200 mVpp |
+10% |
+1% |
| +5VSB |
2.5 A |
0.0 A |
100 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output shall not exceed
152W, (2) +3.3V, +5V, +12V1, and +12V2 total output shall not exceed 440W, (3) total
combined output not to exceed 550W, (3) Output Voltage Hold Time is 17mS. |
|
|
