 |
 |
This ATX12V power supply is a 250W, five output unit with remote on/off, and UL, CSA,
and TUV approvals. Airflow drawn out of case into surroundings by 80mm internal fan.
20 + 4 ATX main board power connector designed for use with 20 pin or 24 pin main
boards. Direct power supply replacement for Dell Systems Dimension 1100, 2200,
2300, 2350, 2400, 4300, 4400, 4500, 4550, 4600, B100, B110; OptiPlex 160L, 170L,
210L, GX50, GX60, GX150, GX240, GX260, GX270; Precision WorkStation 340, 350;
SmartStep 100D and 150D. Dell part numbers D6369, U4714, W4827. Power supply models
DLP2007F3, DLP2507F3B, DLP2507FWP, DLP2507FW2, DLP2507F3CP, HP-P1457F3, HP-P2507F3B,
HP-P2507F3CP, HP-P2507F3C, HP-P2507FWP, NPS-250KB A, NPS-250KB B, NPS-250KB D, NPS-250KB J,
NPS-250GB B. Includes two daisy chained Serial ATA connectors and a Dell proprietary
6 pin "add on" connector. Bestec model ATX-250-12Z, Rev S.
|
|
|
|
|
Connectors & Specifications:
(1) ATX connector, (1) auxiliary power
connector, (1) ATX12V connector, (1) Dell Add-On connector, (2) Serial ATA connectors,
(3) peripheral power connectors, (1) floppy drive connector
|
| 20+4 pin ATX |
ATX12V |
Dell Add-On |
SATA |
Peripheral |
Floppy |
|
|
|
|
|
|
|
| Notes: 20+4 operates as a 24 or 20 pin connector. When using in 24 pin mode,
combine 20 pin and 4 pin connector so yellow wires match yellow wires on one side and red wires
match red wires on other side. If using in 20 pin mode, leave 4 pin connector unattached.
|
Manufacturer: Bestec
Model: ATX-250-12Z, Rev. S
Type: OEM ATX12V
Warranty: 1 year
Dimensions: 140L x 150W x 86H mm (5.5" x 5.9" x 3.4")
Mechanical Details: drawing
Safety: UL, CSA, TUV
Efficiency: 70% minimum
Reliability: > 100K hours at 25°C ambient conditions
AC Input: 115/230VAC selectable, 6/3A, 47-63HZ
DC Outputs (Amps Max/Min): +3.3V (18/0.5A), +5V (25/1.0A), +12V (14/1.0A), -12V (0.8/0.0A), +5VSB (2.0/0.0A)
DC Notes: (1) +3.3V and +5V output not to exceed 165W, (2) +5V and +12V output not to exceed 218W
|
