|
|
| ATX12V-250CPQ (250W Compaq ATX) |
 |
 |
This ATX12V power supply is a 250W, PS2 Form Factor, six output unit with remote on/off,
and UL, CSA, CB, TUV, NEMKO and CE approvals. Does not require 3 pin connector for board
control of power supply fan. Airflow drawn out of case into surroundings by 80mm
ball-bearing fan. Aftermarket product suitable for Compaq part numbers
153652-004, 5187-1098, 5183-6914,
103748-001, 124848-001, 124892-001,
127999-001, 128017-001, 152769-001,
166814-001, 174871-001, 201828-001,
254475-001, and 332863-001.
|
|
|
|
| Connectors |
 |
| This power unit has (1) ATX connector, (1) auxiliary power
connector, (1) ATX12V connector, (5) peripheral power connectors, and (2) floppy drive
connectors. Auxiliary power not required by some Compaq models. |
|
| 20 pin ATX1 |
Auxiliary2 |
ATX12V3 |
Peripheral4 |
Floppy5 |
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2200 or equivalent. Pin 11 also contains +3.3V Sense.
2MOLEX 90331-0010 or equivalent. For power supplies with +3.3V > 18A.
3MOLEX 39-39-9042 or equivalent.
4AMP 1-480424-0 or equivalent. 5AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
Fortron/Source |
Model |
FSP250-60ATV |
| Type |
OEM ATX12V |
Warranty |
1 year |
| Dimensions |
140L x 150W x 86H mm |
Dimensions US |
5.5" x 5.9" x 3.4" |
| Safety |
UL, CSA, TUV, NEMKO, CB, CE |
Efficiency |
65% minimum |
| Reliability |
> 50K hours at 25°C ambient conditions. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 115/230VAC |
10/5 A |
47-63 HZ |
Internal fuse |
| AC Input is switch selectable between 115V
(95-132V) and 230V (180-265V). |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple |
Load |
Line |
| +3.3V |
20 A |
0.3 A |
50 mVpp |
+5% |
+1% |
| +5V |
27 A |
0.5 A |
50 mVpp |
+5% |
+1% |
| +12V |
13 A |
0.0 A |
120 mVpp |
+5% |
+1% |
| -5V |
0.3 A |
0.0 A |
120 mVpp |
+10% |
+2% |
| -12V |
0.8 A |
0.0 A |
100 mVpp |
+10% |
+2% |
| +5VSB |
2.0 A |
0.0 A |
50 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output not to exceed 175W,
(2) Load and line refer to regulation, (3) Output Voltage Hold Time is 16mS. |
|
|
