|
|
| ATX12V-250 (250W ATX12V) |
 |
 |
This ATX12V power supply is a 250W, PS2 Form Factor, six output unit with remote on/off,
and UL, CSA, CB, TUV, NEMKO and CE approvals. Airflow drawn out of case into surroundings
by 80mm ball-bearing fan. Great replacement power supply for wide range of OEM systems, with
either Intel or AMD processor. Compliant with ATX12V Power Supply Design Guide. Replacement
for HIPRO models HP-235NLXAK, HP-235NLXAF, and
HP-P3037F5. Manufacturer p/n FSP250-60ATV.
|
|
|
|
| Connectors |
 |
| This power unit has (1) ATX connector, (1) auxiliary power
connector, (1) ATX12V connector, (5) peripheral power connectors, and (2) floppy drive
connectors. |
|
| 20 pin ATX1 |
Auxiliary2 |
ATX12V3 |
Peripheral4 |
Floppy5 |
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2200 or equivalent. Pin 11 also contains +3.3V Sense.
2MOLEX 90331-0010 or equivalent. For power supplies with +3.3V > 18A.
3MOLEX 39-39-9042 or equivalent.
4AMP 1-480424-0 or equivalent. 5AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
Fortron/Source |
Model |
FSP250-60ATV |
| Type |
ATX12V |
Warranty |
1 year |
| Dimensions |
140L x 150W x 86H mm |
Dimensions US |
5.5" x 5.9" x 3.4" |
| Safety |
UL, CSA, TUV, NEMKO, CB, CE |
Efficiency |
65% minimum |
| Reliability |
> 50K hours at 25°C ambient conditions. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 115/230VAC |
10/5 A |
47-63 HZ |
Internal fuse |
| AC Input is switch selectable between 115V
(95-132V) and 230V (180-265V). |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple |
Load |
Line |
| +3.3V |
20 A |
0.3 A |
50 mVpp |
+5% |
+1% |
| +5V |
27 A |
0.5 A |
50 mVpp |
+5% |
+1% |
| +12V |
13 A |
0.0 A |
120 mVpp |
+5% |
+1% |
| -5V |
0.3 A |
0.0 A |
120 mVpp |
+10% |
+2% |
| -12V |
0.8 A |
0.0 A |
100 mVpp |
+10% |
+2% |
| +5VSB |
2.0 A |
0.0 A |
50 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output not to exceed 175W,
(2) Load and line refer to regulation, (3) Output Voltage Hold Time is 16mS. |
|
|
