|
|
| ATXGES-460 (460W ATXGES) |
 |
 |
460Watt power supply for AMD servers, five output unit with remote on/off, and
UL, CSA, DVE, NEMKO, CB, CE approvals. Standard features include active Power Factor
Correction (PFC) > 0.98 @ 100VAC, full range 100-240VAC input, ball bearing fan with
noise killer, split +12V rails for CPU and subsystem I/O. Airflow drawn through vents in
rear of supply into ambient surroundings. EPS12V power supply with adapters necessary
for AMD server boards using AMD's ATX GES power interface. Compliant with AMD's GES
Power Supply Specification. Remove attached adapters for compatibility with EPS12V or
ATX12V. Manufacturer p/n FSP460-60GLC.
|
|
|
|
| Connectors |
 |
| This power unit has (1) 24 pin ATXGES connector, (1) ATXGES proc
power connector, (1) PCI Express connector, (2) Serial ATA connector, (5) peripheral
power connectors, and (1) floppy drive connector. |
|
| 24 pin ATXGES1 |
Proc Power2 |
PCI Power3 |
SATA Power4 |
Peripheral5 |
Floppy6 |
|
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2240 or equivalent.
2MOLEX 39-01-2080 or equivalent.
3MOLEX 39-01-2060 or equivalent.
4MOLEX housing #675820000, MOLEX terminal #675810000 or equivalents.
5AMP 1-480424-0 or equivalent. 6AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
FSP Group |
Model |
FSP460-60GLC |
| Type |
ATXGES |
Warranty |
1 year |
| Dimensions |
140L x 150W x 86H mm |
Dimensions US |
5.5" x 5.9" x 3.4" |
| Efficiency |
70% minimum |
Acoustics |
< 38dB |
| Safety |
UL, CSA, DVE, NEMKO, CB, CE |
PFC Standard |
EN61000-3-2 + A1 + A2 |
| EMC Standard |
CISPR22, C-tick & FCC part 15 class B |
| Reliability |
> 100K hours with all outputs at maximum load, ambient
temperature of 25°C. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 100-240VAC |
7.5-3.5 A |
50-60 HZ |
Internal fuse |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple & Noise |
Load Regulation |
Line Regulation |
| +3.3V |
30 A |
0.5 A |
100 mVpp |
+5% |
+1% |
| +5V |
30 A |
0.3 A |
100 mVpp |
+5% |
+1% |
| +12V1 |
16 A |
1.0 A |
200 mVpp |
+5% |
+1% |
| +12V2 |
18 A |
1.0 A |
200 mVpp |
+5% |
+1% |
| -12V |
0.5 A |
0.0 A |
200 mVpp |
+10% |
+1% |
| +5VSB |
2.5 A |
0.0 A |
100 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output shall not exceed
152W, (2) +3.3V, +5V, +12V1, and +12V2 total output shall not exceed 440W, (3) total
combined output not to exceed 550W, (3) Output Voltage Hold Time is 17mS. |
|
|
