|
|
| ATX12V-300PN (300W ATX12V) |
 |
 |
This ATX12V power supply is a 300W, six output unit with remote on/off, built-in EMI filter,
and UL, CSA, TUV, NEMKO, CB and CE approvals. Excellent for system cooling, compliments of a
120mm fan providing a CFM of 60 at 39dB; airflow drawn into fan and out rear vents into ambient
surroundings. Designed for Pentium 4 motherboards, also downward compatible with standard ATX
motherboards. Meets specifications ATX 2.03, ATX12V 1.1, and AMD Athlon requirements. RoHS compliant.
Manufacturer p/n FSP300-60PN. Major upgrade for Astec ATX145-3505,
ATX145-3485, ATX250-3505, Fortron/Source FSP300-60GI,
FSP235-60GI, HIPRO HP-235ATXA6, LITEON PS-5161-2G,
Newton NPS-250EB B, NPS-250CB A, NPS-250CB B,
NPS-250HB A, NPS-160CB-1 A, NPS-200PB-119A,
NPS-200PB-119B, NPS-200PB-119C, and PowerTronics
PK-6145-DT, PK-6145DT-3. Good for Gateway p/n's
POW145005AAWW, POW145006AAWW, POW145002AAWW, POW145004AAWW, 6500055, 6500470, 6500457,
6500525, 6500526, 6500563, 6500565, 6500582, 6500583, 6500611, 6500612, 6500652, 6500684,
6500703, 6500704. More power, less noise, better cooling, internal fan.
|
|
|
|
| Connectors |
 |
| This power unit has (1) 20 pin ATX connector, (1) auxiliary power
connector, (1) ATX12V connector, (4) peripheral power connectors, and (2) floppy drive
connectors. |
|
| 20 pin ATX1 |
Auxiliary2 |
ATX12V3 |
Peripheral4 |
Floppy5 |
|
|
|
|
|
|
Connector notes:
1MOLEX 39-01-2200 or equivalent. Pin 11 also contains +3.3V Sense.
2MOLEX 90331-0010 or equivalent. For power supplies with +3.3V > 18A.
3MOLEX 39-29-9042 or equivalent.
4AMP 1-480424-0 or equivalent. 5AMP 171822-4 or equivalent.
|
| Specifications |
| Manufacturer |
Sparkle Power |
Model |
FSP300-60PN |
| Type |
ATX12V |
Warranty |
1 year |
| Dimensions |
140L x 150W x 86H mm |
Dimensions US |
5.5" x 5.9" x 3.4" |
| Safety |
UL, CSA, TUV, NEMKO, CB, CE |
Efficiency |
65% minimum |
| Reliability |
> 100K hours with all outputs at maximum load, ambient temperature of 25°C. |
|
| AC Input |
| Voltage |
Max current |
Frequency |
Protection |
| 115/230VAC |
10/5 A |
47-63 HZ |
Internal fuse |
| AC Input is switch selectable between 115V
(95-132V) and 230V (190-264V). |
|
| DC Outputs |
| Voltage |
Max Current |
Min Current |
Max Ripple |
Load |
Line |
| +3.3V |
15.1/28 A |
0.3 A |
50 mVpp |
+5% |
+1% |
| +5V |
30/21.5 A |
1.0 A |
50 mVpp |
+5% |
+1% |
| +12V |
15 A |
0.2 A |
120 mVpp |
+5% |
+1% |
| -5V |
0.3 A |
0.0 A |
100 mVpp |
+10% |
+2% |
| -12V |
0.8 A |
0.0 A |
120 mVpp |
+10% |
+2% |
| +5VSB |
2.0 A |
0.0 A |
50 mVpp |
+5% |
+1% |
| Notes: (1) +3.3V and +5V total output not to exceed 200W,
(2) +3.3V, +5V, and +12V total output not to exceed 280W,(3) Load and Line refer to
regulation, (4) Output Voltage Hold Time is 17mS. |
|
|
